Power Factor Interview Tips

What is power factor?
The power factor of an AC electrical power system is defined as the ratio of the real power to the apparent power in the circuit , its value between 0 and 1. OR cosφ is power factor, where φ is angle between voltage and current.

Power Factor Angle

Power Factor Angle

“Unity, Leading and Lagging” Power Factors
• With a purely resistive load current and voltage changes polarity in step and the power factor will be 1. Electrical energy flows in a single direction across the network in each cycle.
• Inductive loads: Transformers, motors and wound coils – consumes reactive power with current waveform lagging the voltage.
• Capacitive loads: Capacitor banks or buried cables – generates reactive power with current phase leading the voltage.

What is the effect if power factor is above 1 or Unity Power Factor?
At unity power factor all active power used so it is real power and reactive power will zero, so losses will be zero. If power factor is above one reverse current will be occurred (Example: Motors will works as a generators)

The Power- factor at resonance in R-L-C circuit is—

Disadvantages of low power factor (Explain):

effect of low p.f

Disadvantages of Low Power Factor

Methods of improving power factor:
1) Static Capacitors: The static capacitors are connected in parallel with the load operating at
lagging power factor.
2) A synchronous motor takes a leading current when over excited and therefore behaves like
a capacitor.
3) Phase advancers: Are used to improve the power factor of induction motors. It provides
exciting ampere turns to the rotor circuit of the motor. By providing more ampere-turns than required, the induction motor can be made to operate on leading power factor like an overexcited synchronous motor.

1. The power factor of ordinary bulb is—

More MCQ of Power Factor: Click Here
For Bangla Interview Tips of Power Factor: Click Here

এই পোস্টটি শেয়ার করুন